levi2
Full Member
Posts: 667
|
Post by levi2 on Nov 7, 2008 18:35:59 GMT
i want to repan 1 drum inst from far right back to centre i have split the drum tracks but when i go to pan it all the other tracks pan aswell so in the end i have the one i want in the middle but the rest move to far left any ideas how to alter it so it just pans the one track im using sspro and power tracks pro audio 12
levi2
|
|
gibbo
Full Member
I'm not lost, I followed you home
Posts: 674
|
Post by gibbo on Nov 10, 2008 3:59:42 GMT
Levi, If you want independent panning you need to put the drum on a separate midi channel ie: Channel 11 usually allows selection of a second drum kit on most modules. If you have it on the default channel 10 then any changes will effect all drums.
Cheers, Dave.
|
|
|
|
Post by gspro on Nov 10, 2008 14:00:20 GMT
Hi Levi,
I'm not familiar with the software you are using. If you are sending your midi file to a sound generator, place these control changes at the begining of the measure in the drum track as follow:
CC#99=28
CC#98= drum note #, ie: 40= snare
CC#6=1=L_0=Random_127=Right
Hope that helps
|
|
levi2
Full Member
Posts: 667
|
Post by levi2 on Nov 10, 2008 16:53:43 GMT
thnx for reply will give them a try
|
|
|
|
Post by JohnG on Nov 10, 2008 18:59:06 GMT
Sorry I've been a bit distracted from the general techie questions. If you still have problems I can do the edit for you if you know whereabouts you want to place it.
Remember the drum set is normally already panned to both left and right of centre a bit by the sound module maker. But it is possible to pan individual instruments.
JohnG.
|
|
